background image

5

and used in accordance with the instruction 

manual, may cause harmful interference to 

radio communications.

However, there is no guarantee that 

interference will not occur in a particular 

installation. If this equipment does cause 

harmful interference to radio or television 

reception, which can be determined by 

turning the equipment off and on, the user is 

encouraged to try to correct the interference 

by one or more of the following measures:

Relocate the receiving antenna.

• 

Increase the separation between 

• 

equipment and receiver.
Connect the equipment into an outlet on 

• 

a circuit different from that to which the 

receiver is connected.
Consult the dealer or an experienced 

• 

radio/TV technician for help.

Notice for Canada

Class B Clause

This digital apparatus does not exceed the 

Class B limits for radio noise emissions from 

digital apparatus as set out in the Radio 

Interference Regulations of the Canadian 

Department of Communications.
This Class B digital apparatus complies with 

Canadian ICES-003.

Recycling

  

Your product is designed and manufactured 

with high quality materials and components, 

which can be recycled and reused.
Never dispose of your product with other 

household waste. Please inform yourself about 

the local rules on the separate collection of 

electrical and electronic products. The correct 

disposal of your old product helps prevent 

potentially negative consequences on the 

environment and human health.
The packaging of this product is intended to 

be recycled. Contact your local authorities 

is damaged, liquid has been spilled or 

objects have fallen into the apparatus, 

the apparatus has been exposed to rain 

or moisture, does not operate normally, 

or has been dropped.

o

  Battery usage CAUTION – To prevent 

battery leakage which may result in 

bodily injury, property damage, or 

damage to the unit: 

Do not mix batteries (old and new 

• 

or carbon and alkaline, etc.).

Remove batteries when the unit is 

• 

not used for a long time.

p

  Apparatus shall not be exposed to 

dripping or splashing. 

q

  Do not place any sources of danger on 

the apparatus (e.g. liquid filled objects, 

lighted candles). 

Warning

Use only the provided power supply.

 

Manufacturer: SINO-AMERICAN
Model: SA115B-05-A

Interference information

This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following 

two conditions :

1

  This device may not cause harmful 

interference; and

2

  This device must accept any interference 

received, including interference that may 

cause undesired operation.

Notice for USA

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide 

reasonable protection against harmful 

interference in a residential installation. This 

equipment generates, uses and can radiate 

radio frequency energy and, if not installed 

English

EN

Summary of Contents for SWW1800/27

























Reviews: