background image

11

Features menu

&

Press the yellow colour key to display/cancel the 

FEATURES 

menu.

é

Use the 

B

keys to select the menu item.

Use the blue 

OK

key to activate.

Store PP

The adjustments of Contrast, Brightness, Colour and Contrast Plus made in
the picture menu and the adjustments of Volume, Balance, Treble, Bass and
Loudness made in the sound menu can be stored in memory for all the stored
TV channels.

Select Programme list

Programme numbers from the favourite list are displayed in white characters.
Programme numbers which are not in the favourite list are displayed in black.
The current TV channel on the screen is indicated with a black block.

Press the 

CD

keys to select another column of the programme list.

Press the blue 

OK

key to select the desired TV channel.

Sleeptimer

With the sleeptimer you can set a time period after which the TV should
switch itself off to standby.
The counter runs from 

Off 

up to 

180 min.

or from 

180 min

. down to 

Off

.

One minute before the TV is set to go to standby, the remaining minute and
the message 

Good Night

appear on screen. You can always switch off your

set earlier or change the set time.

Child Lock

If the child lock is on, the TV can only be switched on with the remote control.
The - and + keys on front of the TV cannot be used to select a TV channel. In
this way you can prevent unauthorised use of your TV.
If the message

Child Lock On

appears, the child lock must be switched off

before you can use the - and + keys on the TV to select a TV channel.

FEATURES

Store PP

Programmes
Sleeptimer
Message
Child Lock         on/off

Good Night

MENU

o

p

œ

π

OK

Select adjustments

Picture 

menu

Sound

menu

Features 

menu

Activate

3104 305 4756.1.gb  28-05-1999  16:31  Pagina 11

Summary of Contents for TV Remote Control





















Reviews: