43 VSM Pro User Guide
Adjusting Brightness
The Brightness menu is only available from the hardware Control Panel. By default, the
brightness level is 100%. Use the following steps to adjust brightness:
1.
Start VSE Pro
2.
Using the right menu navigation button, scroll to the
Brightness
menu
3.
Using the up and down navigation buttons, scroll to the desired brightness level
4.
Using the left navigation button, scroll back to the main menu
Network Optimization Features
Synchronization
By default, Data Enablers and Power / Data Supplies instantly send any received packets of data
to connected fixtures and nodes. Since Data Enablers and Power / Data Supplies receive data at
a slightly staggered rate from each other, sections of the video display can appear to be out of
sync if your system has limited bandwidth.
With the synchronize packets feature, you can instruct all Data Enablers and Power / Data
Supplies to hold data until all packets of data are received, and then send the packets in unison.
This feature can correct out-of-sync video.
Use the following steps to configure packet synchronization:
1.
From the User Interface main menu, select the
Synchronization
menu
2.
Select the
Override map settings, send sync packets
radio button
3.
Select
Update
to make the change
