background image

M

AINTENANCE

 P

ROCEDURES

 : C

OLOR

/D

IMMER

/S

TROBE

 A

SSEMBLY

0 2 . 9 6 7 8 . 0 0 1 0   G

25

2

Color/Dimmer/Strobe Assembly

VL Part No:  22.9678.0402 
VL Part No:  22.9678.0462 (Q Version)

Repair/Replacement Procedure

Step

1. Disconnect luminaire AC input cable from power source.

Step

2. Remove top head cover by loosening four 1/4 turn captive stud connectors.

Note:  

The top cover is easily identified as follows - maneuver head so the printing on the label on the 

rear of the head assembly is oriented correctly.

Step

3. Disconnect wiring harness from interconnect PCB. 

Step

4. Remove interconnect PCB by pushing top of PCB off studs.

Step

5. Loosen four captive screws (two per clamp). (Note: Do NOT remove long phillips head 

screw, it serves as a handle.)

Step

6. Pull assembly straight up and out of luminaire.

Step

7. Replace assembly by performing steps 2 through 6 in reverse order.

Figure 2-7:  VL3000 Color/Dimmer/Strobe Assembly Replacement

Color/Dimmer/Strobe Assembly

Top Head Cover

Clamp

Summary of Contents for VL3000



























































































































































































































Reviews: