35
US
Registering
Register a new handset to base station
Each base can register up to 4 handsets.
1. In idle mode, press
.
2. Select
ADVANCED SET
and press
OK
.
3. Select
REGISTRATION
and press
OK
.
4. Long press
on the base for 4 seconds.
Unregister a handset
A handset can un-register another handset registered to the same base. It can also un-register itself.
1. In idle mode, press
.
2. Select
ADVANCED SET
and press
OK
.
3. Select
DELETE HS
and press
OK
.
4. Select the handset you would like to un-register and press
OK
.
5. Press
OK
to confirm.
Select the base station
If your handset is registered to more than 1 base, you can select which base the handset will use.
1. In idle mode, press
.
2. Select
ADVANCED SET
and press
OK
.
3. Select
BASE SELECT
and press
OK
.
4. Select the base to use and press
OK
.
Note :
If the base is full, the base would not go into registration mode. See the section “Unregister a
handset”, page 35 to unregister a currently registered handset.
Note :
The range of this handset is 250 m outdoor and 50 m indoor. An out of range warning will be
emitted and the range icon will be flashing on the display if you move too far away from the base unit
during a call. You will need to move closer to the base unit or your call will be disconnected.
Note :
Bases your handset is registered to which is not Philips VOIP 321 base will be labelled as GAP
BASE; your Philips VOIP 321 base will be labelled as BASE in Base Select.
Other features
Summary of Contents for VOIP 321
Page 1: ...User manual Charge the handset s for 24 hours before use ...
Page 2: ......
Page 48: ...48 US Notes ...
Page 49: ......