Philips VOIP 321, User Manual

5

US

Safety information

This telephone is not designed for making emergency telephone calls when the power fails. An alternative 

should be made available for access to emergency calling.

Power requirements

The product requires an electrical supply of 120 volts, single phase alternating current, excluding IT installations 

defined in standard EN UL 60950.

Battery requirements

The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 650mAh (Hr11/45). 

IF THE INCORRECT TYPE OF BATTERIES ARE USED, A WARNING MESSAGE WILL BE DISPLAYED.

Telephone connection

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the 

standard UL 60950). Following a power cut, the call in progress is lost.

Safety precautions

>

Do not allow the handset to come into contact with liquids or moisture. 

>

Do not open the handset, base station or charger. This could expose you to high voltages. 

>

Do not allow the charging contacts of the charger or the battery to come into contact with extraneous 

conductive materials. 

>

There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended 

that users unplug the phone from the USB socket and the phone line from the phone wall socket during 

a storm. 

>

Do not use the handset in an explosive hazard area such as where there is gas leaking.

>

Young children should be supervised to ensure that they do not play with the telephone.

>

Because the phone works by sending radio signals between the base unit and the handset, wearers of 

hearing aids may experience interference in the form of a humming noise.

>

We advise that this phone should not be used near intensive care medical equipment or by persons with 

pacemakers.

>

Your phone can interfere with electrical equipment such as answering machines, TV and radio sets if placed 

too close. It is recommended that you position the base unit at least one meter from such appliances.

FCC CERTIFICATION NUMBER IS LOCATED ON THE CABINET BOTTOM

WARNING :

  The electrical network is classified as dangerous according to criteria in the standard 

UL 60950. The only way to power down this product is by unplugging the power supply from the 

electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily 

accessible.

 CAUTION :

  Use only the mains adapter supplied with this telephone. Incorrect adapter polarity 

or voltage can seriously damage the unit.

Base adapter                                   Charger adapter

Input : 120VAC 60 Hz                         Input : 120VAC 60 Hz

Output :  9VDC 300mA                      Output:   9VDC 150mA

 CAUTION :

  RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.  

Never use non-rechargeable batteries; use recommended type supplied with this telephone.  NiMH 

batteries must be disposed of in accordance with the applicable waste disposal regulations.

Environment and safety