Continuous playback
You can continuously repeat the replay of a cassette. When
the end of the tape has been reached, it rewinds and begins
again.
1
Press the
PLAY
G
button.
2
Whilst holding down the
MONITOR
button on the remote
control, press the
PLAY
G
button on the video recorder.
In the display appears:
REP
3
If you want to cancel the function, repeat step
2
.
Note:
No other button will react during continuous
playback. After a power failure, playback will automatically
start again.
Eliminating picture interference/
Cleaning function
1
During playback, hold the
P
q
button until ’TRAC’(track-
ing) appears in the display.
2
Hold the
P
q
or
P
r
button until the playback quality is
at its best.
3
Wait a few seconds, until ’TRAC’ disappears from the
display. This setting will remain until you remove the
cassette.
4
If horizontal lines still appear on the screen, use the
Cleaning function:
Cleaning function:
During playback, hold the
PLAY
G
button until ’HEAD’ (video head cleaning) appears in the
display. The video heads are being cleaned. The video
recorder automatically switches back to playback.
Note:
Some hired cassettes may have a poor picture/sound
quality. This is not a fault in your video recorder.
7
