— 21 —
.....
One Touch Recording (OTR)
The OTR function lets you quickly
specify how long you want a recording
to continue. You do not have to
programme the timer.
1
On TV
1 Turn on the TV.
2 Select the video channel (or external
video input).
2
On VCR
Insert a cassette with the record tab in
place.
The VCR turns on.
• If a cassette is already in the VCR, turn
on the VCR.
3
Select Channel
Press
CH
5 / ∞ or
Number
buttons to
select the channel to record.
4
Start OTR
Press
REC/OTR
a
twice.
Recording starts immediately, and the
(Record) indicator lights up on the
display.
This indicates that the
VCR will
automatically shut off
after 30 minutes of
recording.
5
Select Recording Length
Press
REC/OTR
a
repeatedly until the
desired recording length appears.
Each time you press the button,
recording length increases in 30-minute
intervals.
Using On-Screen Display
You can display the VCR operating
status on the TV screen.
For the information about what you can
see on the TV screen, see page 9.
1
Select VCR Set Up Mode
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“VCR SET UP”
then press
OK/STATUS
.
The VCR Set Up menu appears.
2
Select On-Screen Mode
1 Press
PLAY
5 or
STOP
∞ to select
“ON SCREEN MODE.”
2 Press
FF
3.
Each time you press the button, the
setting changes.
ON:
When you press a tape running
button (Stop, Play, etc.), the VCR
status appears for 5 seconds.
COUNTER:
When you press a tape running
button, the VCR operating status
appears for 5 seconds.
After 5 seconds, the VCR status
disappears except the time counter.
OFF:
The VCR operating status does not
appear even if you press a tape
running button.
3
Finish Setting
Press
MENU
.
To display the VCR status on the TV
screen manually, press
OK/STATUS
.
The VCR status appears for about 5
seconds.
• If “ON SCREEN MODE” is set to OFF,”
no VCR status appears though you press
OK/STATUS.
REC (Normal recording)
+
+
+
+
+
To check time remaining
during an OTR
Press
OK/STATUS
.
To change the recording
length during an OTR
Press
REC/OTR
a
until the desired
length appears.
To cancel an OTR
Press
STOP
7 to stop recording before
the preset recording length is reached.
If you want to cancel the OTR mode
but continue recording, press
REC/
OTR
several times until “OTR”
changes to “REC” on the TV screen.
Notes on the indications on the display
while an OTR operation
• During recording, the displayed time
counts down. When “0:00” is reached,
recording stops and the VCR turns off
automatically.
• If an OTR is engaged during pause, the
displayed time counts down normally but
recording does not begin until you cancel
the pause.
=
0:30
=
1:00
=
1:30
5:30
=
6:00
OTR(0:30)
CH12
SP
DSPC
ON
ON SCREEN MODE ON
TIMER REC SPEED MANUAL
AUDIO OUT HIFI
AUTO SAT
RECORD LINK OFF
S-VHS MODE
ON
SELECT: CHANGE:
END: MENU
vr1010/75
00.6.29, 4:54 PM
21
