1 : Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as Identification (location) No. of parts in the figures.
2 : Indicates the part to start disassembling with in order to disassemble the part in column (1).
3 : Name of the part
4 : Location of the part: T=Top B=Bottom R=Right L=Left
5 : Figure Number
6 : Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
7 : Adjustment Information for Installation
(+): Refer to Deck Exploded Views for lubrication.
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL
INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[31]
[30]
Tension Lever Assembly
T
DM1, DM11 *(P-7), (C-6)
[32]
[31]
Tension Lever Sub
Assembly
T
DM1, DM11
[33]
[31]
Reel S Assembly
T
DM1, DM11 (C-7),
Poly Slider Washer
[34]
[29]
Reel T Assembly
T
DM1, DM11 (C-8),
Poly Slider Washer
[35]
[33]
Reel Shaft
T
DM1, DM11 2(S-19)
[36]
[18]
First Gear
B
DM2, DM12 (C-9)
[37]
[36]
Second Gear
B
DM2, DM12 (C-10), (W-2)
[38]
[37]
FF Arm
T
DM1, DM13
[39]
[37]
Idler Assembly
T
DM1, DM13
[40]
[37]
BT Arm Assembly
B
DM2, DM14
[41]
[19]
Loading Arm T Assembly
B
DM2, DM14 (C-11)
(+) Refer to Alignment
Sec. Pg. 2-4-10
[42]
[41]
Loading Arm S Assembly
B
DM2, DM14
(+) Refer to Alignment
Sec. Pg. 2-4-10
[43]
[2]
Moving Guide S
Preparation
T
DM1, DM15
[44]
[2]
Moving Guide T
Preparation
T
DM1, DM15
[45]
[2]
Cleaner Lever Assembly
T
DM1, DM4
[46]
[45]
CL Post
T
DM1, DM4
↓
➀
↓
➁
↓
➂
↓
➃
↓
➄
↓
➅
↓
➆
2-4-2
H67T0DA
www.freeservicemanuals.info
06/28/2012
World of Free Manuals
