b
Press the
MENU
button on the remote control. The main
menu will appear.
c
Select the line ’
MANUAL SEARCH
’ with the
P
q
or
P
r
button and confirm with the
OK
button.
CH 26
P01
------------------------
SEARCH
g
+
0-9
OK
d
Hold the
P
q
button until you have found the right TV
channel. A changing channel number or frequency will
appear on the screen.
D
If you know the frequency or channel number of the
desired TV channel, you can enter the information in
line with the number buttons
0-9
on the remote
control.
e
Confirm with the
OK
button.
f
With the
P
q
or
P
r
button or with the number buttons
0-9
, select the programme number you want to give to
this TV channel, for instance, ’P01’.
g
Confirm with the
OK
button.
If you want to allocate more TV channels, repeat steps
d
through
g
.
h
To end, press the
TV/STANDBY
m
button.
Channel number or frequency display
You can switch between the display for ’channel number’ or
’frequency’ for manual channel search.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
MENU
button on the remote control. The main
menu will appear.
c
Select the line ’
CHANNEL/FREQUENCY
’ with the
P
r
or
P
q
button and confirm with the
OK
button.
d
With the
P
q
button, select ’
CHANNEL
’ or
’
FREQUENCY
’ and confirm with the
OK
button.
e
To end, press the
TV/STANDBY
m
button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket
EXT.2 AV 2
.
To do this, select the channel number ’
E2
’ by pressing the
buttons
P
q
or
P
r
. You will have to select the channels to
be received by the satellite receiver on the receiver itself.
Special installation functions
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
Automatic TV channel search (Autoinstall)
The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
D
If you want to start the automatic TV channel search
again, then follow the instructions below.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
MENU
button on the remote control. The main
menu will appear.
c
Select the line ’
AUTOINSTALL
’ with the
P
r
or
P
q
button.
d
Press the
OK
button. The ’Automatic TV channel search’
starts.
AUTOINSTALL
00
Wait until all TV channels have been found. This can take
several minutes.
e
When Autoinstall is complete, ’
READY
’ will appear on the
display.
The time and date information have been set.
7
