—13 —
A
DVANCED
O
PERATIONS
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
You can prevent the VCR operations.
To use Child Lock
When the VCR is turned on, press and hold
POWER
f
on the remote control for more than
10 seconds to turn off the VCR.
The “CL” appears blinking on the display.
While “CL” is on the display, you cannot turn
on the VCR by pressing
POWER
f
on the front
panel.
To cancel Child Lock
Press and hold
POWER
f
on the remote control
for more than 10 seconds to turn on the VCR.
The “CL” disappears on the display and VCR is
turned on.
You can also cancel the child lock function by
unplugging the AC power cord.
Rec(ord) End Search
Child Lock
This function enables you to search forward to
the next unrecorded portion of the tape (or to the
point at which recording was stopped).
1 Press the
REC END SEARCH
button. The
VCR begins fast forwarding or rewinding to
find the blank portion or the recording end
portion on the tape. SEARCHING
FOR REC
END
will appear on the screen during the
search.
2 The VCR automatically stops when the blank
portion or the recording end portion is reached.
REC END SEARCH COMPLETED
will
appear on the screen briefly.
The tape remaining tape time also appears on
the display panel.
3
Select Channel
Press
CH
5 / ∞ or
Number
buttons to select the
channel to record.
4
Start OTR
Press
REC/OTR
q
twice.
Recording starts immediately, and the
(Record) indicator lights up and blinks on the
display.
This indicates that the VCR will
automatically shut off after 30
minutes of recording.
5
Select Recording Length
Press
REC/OTR
q
repeatedly until the desired
recording length appears.
Each time you press the button, recording length
increases in 30-minute intervals.
=
0:30
=
1:00
=
1:30..... 5:30
=
6:00
REC (Normal recording)
+
+
+
+
+
To check time remaining during an OTR
Press
OK/STATUS
.
To change the recording length during an
OTR
Press
REC/OTR
q
repeatedly until the desired
length appears.
To cancel an OTR
Press
STOP
7 to stop recording before the preset
recording length is reached.
If you want to cancel the OTR mode but continue
recording, press
REC/OTR
q
several times
until “OTR” changes to “REC” on the TV screen.
Notes on the indications on the display while an OTR
operation
• During recording, the displayed time counts down.
When “0:00” is reached, recording stops and the VCR
turns off automatically.
• If an OTR is engaged during pause, the displayed
time counts down normally, but recording does not
begin until you cancel the pause.
One Touch Recording (OTR)
The OTR function lets you quickly specify how
long you want a recording to continue. You do
not have to programme the timer.
1
On TV
1 Turn on the TV.
2 Select the video channel (or AV mode).
2
On VCR
Insert a cassette with the record tab in place.
The VCR turns on.
• If a cassette is already in the VCR, turn on the VCR.
OTR(0:30)
CH12
SP
220/75
01.5.11, 4:16 PM
13
