background image

—23—

B

EFORE

 

R

EQUESTING

 

S

ERVICE

Check the following points once again if you are having some difficulties with your VCR.

IMPORTANT

Periodic maintenance is required in order to maintain the VCR’s continuous excellent performance.
After a period of time the video heads will require replacement. If cleaning or replacement of the
video heads is required, this service should be performed at an authorized video system service
center.

Power

No power.

Recording & Playback

TV programme cannot be recorded.

Timer recording cannot be performed.

There is no playback picture, or the playback
picture is noisy or contains streaks.

During a still or slow motion picture, the
picture may contain some vertical jitter when
using a TV which has an automatic vertical
hold control.

Correction

Make sure the AC power cord is correctly
connected to an AC outlet.

Make sure the VCR is turned on.

Correction

Check the connections between the VCR,
the antenna, and the TV.

Make sure that the record tab on the back of
the cassette is not removed. (

P.12)

Set the timer on-time and timer off-time
correctly. (

P.18)

Make sure that the VCR is turned off after
setting is made. (

P.17, P.19)

Timer recording may not be performed or
stopped if a power interruption occurs before
or during timer recording. If the power
resumes within three minutes, timer
recording will also resume.

Select your video channel correctly. (

P.8)

Adjust the tracking slowly in either direc-
tion. (

P.14)

Try to change to another tape, you may not
have this problem.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

220/75

01.5.11, 4:17 PM

23

Summary of Contents for VR220


























Reviews: