S
ETTING
U
P
(C
ONTINUED
)
— 10—
1 Press
MENU.
2 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP”, then press OK/STATUS.
3 Press
PLAY
5 or
STOP
∞ to select
“CHANGING TUNER SET UP”, then press
OK/STATUS. The prog-
rammed channel information
list appears with the settings
of the tuned channel flashing.
(You can also watch the
picture of the tuned channel since the list and
the picture alternates on the TV).
4 Press
PLAY
5 or
STOP
∞ until the desired
channel setting flashes.
4.1: TO DELETE UNWANTED CHAN-
NELS: Press CLEAR. Repeat this step until
you delete all unwanted channels.
• If you have accidentally deleted a channel,
press
REW
2.
4.2: TO EXCHANGE CHANNEL POSI-
TION: Press OK/STATUS once so that the
channel number flashes.
Using the number button on
the remote control, enter the
other channel number that
you want to exchange with,
then press OK/STATUS.
The position of both channels are exchanged.
4.3: TO FINE-TUNE CHANNELS
Press OK/STATUS twice so that the fre-
quency indication flashes.
Press
PLAY
5 or
STOP
∞
to fine-tune the station until
you get the best possible
picture, then press
OK/STATUS.
4.4: TO CHANGE THE TV SYSTEM:
This is necessary if no sound comes out on the
channel.
Press OK/STATUS three
times so that the TV system
indication flashes.
Press
PLAY
5 or
STOP
∞
to select the appropriate TV
system (BG, DK, I) so that the sound comes
out, then press OK/STATUS.
5 Press
MENU
to exit.
When you want to do channel setting manually,
follow this procedure.
1 Repeat steps 1-3 of “To delete or edit receiv-
able channels” on the left column
.
2 Press
PLAY
5 or
STOP
∞ until a vacant
channel in which you want to store a new
channel starts flashing, then press OK/
STATUS.
3 Press
PLAY
5 or
STOP
∞
to select the search starting
band, then press OK/
STATUS.
VHF L: Starts searching from
the VHF L band.
VHF H: Starts searching from the VHF H
band.
UHF: Starts searching from the UHF band.
Searching starts, and when a station is tuned in,
searching stops and the tuned frequency is
shown on the TV.
4 Press
PLAY
5 or
STOP
∞
to select “STORE CHAN-
NEL”, then press OK/
STATUS.
The programmed channel
information list appears again with the settings
of the newly tuned channel flashing.
• If you do not want to store the channel, select
“CONTINUE SEARCH”, then press OK/
STATUS so that the search starts again.
5 Press MENU to exit.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Manual Channel Setting
To Delete or Edit Receivable Channels
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
SELECT: DELETE: CLEAR
CHANGE CH: OK
END: MENU
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
SELECT: DELETE: CLEAR
CHANGE CH: OK
END: MENU
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
SELECT: DELETE: CLEAR
CHANGE CH: OK
END: MENU
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
SELECT: DELETE: CLEAR
CHANGE CH: OK
END: MENU
VHF L
VHF H
UHF
SELECT: CONFIRM: OK
END: MENU
STORE CHANNEL
CONTINUE SEARCH
SELECT:
CONFIRM: OK
END: MENU
220/75
01.5.11, 4:16 PM
10
