d
Select the line ’AUTO STANDBY’ with the menu buttons
P
=
or
P
;
.
e
Select ’ON’ with the menu buttons
Q
or
P
. If you se-
lect ’OFF’, the function will be switched off.
f
Confirm with the
OK
button.
g
To end, press the
MENU
button.
D
A
TIMER recording
only functions when the video
recorder is
switched to standby
.
The ’DEMO’ function
When the ’DEMO’ function is switched on and the video
recorder
switched off
, several menus will be demonstrated on
the TV screen. This has no influence on operating the video
recorder.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
MENU
button. The main menu appears.
c
Select the line ’SPECIAL SETTINGS’ with the menu
buttons
P
=
or
P
;
and confirm with the
P
button.
d
In the line ’DEMO’, select ’ON’ with the menu buttons
P
or
Q
.
If you select ’OFF’ the function will be switched off.
e
Confirm with the
OK
button.
f
To end, press the
MENU
button.
D
The ’DEMO’ function is not possible during a ’TIMER
recording’ and during an ’Automatic recording from a
satellite receiver’.
Poor TV reception - Optimize the modulator
With ’Connecting without scart cable’, UHF-channel CH35 or
583MHz might already be being used by another TV station in
your reception area. In this case the picture quality on your TV
set will be adversely affected when receiving one or more TV
channels.
a
Ensure that
no
cassette has been loaded. On the video
recorder,
simultaneously
hold the
STOP/EJECT
?
and
the
PLAY
G
button for a few seconds until e.g.: ’CH35’
or ’583’ appears in the display. The video recorder
transmits a test picture on this UHF-channel (or this
frequency).
INSTALLATION
OPTIMIZE MODULATOR
OPTIMIZE
|
CH35
MODULATOR
ON
CHANNEL/FREQ.
CH
________________________________
TO EXIT
PRESS
MENU
b
In line ’CHANNEL/FREQ.’ select the indication for channel
’CH’ or frequency ’FREQ.’, using the menu buttons
P
or
Q
.
c
Select the line ’OPTIMIZE’ with the menu buttons
P
;
or
P
=
. Press the menu button
P
.
d
When the video recorder finds a ’free’ TV channel, the
channel or frequency will be indicated.
D
You can also enter the channel or frequency directly with
the digit buttons
0-9
.
e
Tune in the TV set in this channel or frequency.
f
Confirm the channel or frequency indicated with the
OK
button.
g
To end, press the
MENU
button.
Switching off the modulator
If you cannot eliminate picture or sound interference, you can
switch off the built-in modulator. You should only do this if you
have connected the video recorder to the TV set with a scart
cable. ’Connecting VCR without scart cable’ is not possible
when the modulator is switched off.
17
