— 21 —
2 Press
VCR
.
3 Press
TIMER
.
4 Press
5
or
∞
to
select
“PROGRAM
REVIEW” then
press
OK/
3
.
The list of the timer recording
programmes appears.
5 Press
OK/
3
repeatedly to view the
more detailed programme informa-
tion.
• When you press the button for the first
time, the detailed programme
information for
Programme 1
appears. By
pressing this button
repeatedly, you can
review the detailed
information of all other programmes.
6 If you want to change the
programme setting shown on the
TV screen, press the following
buttons:
CH
5
/
∞
: Changes the channels.
START +/–
: Changes the start time.
STOP +/–
: Changes the stop time.
SPEED
: Changes the tape speed.
DATE +/–
: Changes the date.
If you want to erase the
programme setting shown on the
TV screen, press
CLEAR
. The
detailed information of the next
programme appears.
7 Press
EXIT/STATUS
to exit from
the menu operations.
Note:
This function does not work for OTR (One
Touch Recording).
How to see the programme list
1 Programme numbers
2 Preset channel numbers
3 Start time
4 Stop time
5 Start date
“D” stands for “DAILY,” and “W”
stands for “WEEKLY.”
• If the programme has worked
once for the Daily recording,
“DAILY” will be shown instead
of the start date.
• If the programme has worked
once for the Weekly recording,
the day of the week (in this
example, “MON”) will be shown
instead of the start date.
4
Select Start Time
Press
START +
or
–
(Number button
1
or
4
).
• Each time you press
the button, the set
time changes by 1-
minute intervals. If you hold the button,
the set time changes by 30-minute
intervals.
5
Select Stop Time
Press
STOP +
or
–
(Number button
2
or
5
).
• Each time you press
the button, the set
time changes by 1-
minute intervals. If
you hold the button, the set time changes
by 30-minute intervals.
6
Select Tape Speed
Press
SPEED
.
• Each time you press
the button, the tape
speed alternates
between “SP”, “LP”,
and “SLP”.
SP, LP : For PAL signal
SP, SLP : For NTSC signal
7
Select Start Date
Press
DATE +
or
–
(Number button
3
or
6
).
• The year and day of
the week is displayed
automatically.
8
Select Recording Type
If you want to record the same
programme daily, press
DAILY
(Number button
8
).
The VCR will record a TV programme
every day (Monday through Friday) at
the same time and length (Daily
Recording).
If you want to record the same
programme weekly, press
WEEKLY
(Number button
9
).
The VCR will record a TV programme
once a week at the same day, time, and
length (Weekly Recording).
If you want to cancel the currently
set programme, press
CLEAR
.
9
Confirm Programme
Press
EXIT/STATUS
.
“PROGRAM WAS COMPLETED”
appears on the TV screen.
After 5 seconds, the above message
disappears, and the normal TV picture
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 30
STOP +/– – –:– –
REC SPEED SP
DATE +/– 07/04/98
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 30
STOP +/– 09 : 30
REC SPEED SP
DATE +/– 07/04/98
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12
resumes. The
(Timer) indicator
lights up on the display.
• If “PROGRAM NOT COMPLETED”
appears, try again from step 1.
• If “PROGRAM NOT COMPLETED
CLASH” appears, the timer recording
you just programmed overlaps another
timer recording. The timer recording you
just programmed will not take place. The
timer recording menu will reappear.
If you want to store other
programmes, repeat steps 1 to 9.
10
Finish Settings
Press
POWER
to turn off the VCR.
The VCR must be turned off for a timer
recording to take place. If you forget to
turn off the VCR, “PLEASE TURN
OFF VCR FOR TIMER
RECORDING” flashes on your TV
screen two minutes before a timer
recording starts. To remove the
message, press the
CLEAR
button.
After a timer recording has
taken place
Press
POWER
to turn on the VCR.
You can operate your VCR normally.
To stop a started timer recording
Press
POWER
.
Recording stops and the VCR turns off.
If it is a Daily or Weekly Recording,
future recordings will be carried out as
programmed.
Useful function for Timer
Recording: Auto Tape Speed
With this function activated, the VCR
can change the tape speed and record
the programme in SLP or LP mode
unless enough tape remains for
recording in SP mode.
1 Press
VCR
.
2 Press
MENU
.
3 Press
5
or
∞
to select “VCR SET
UP” then
OK/
3
.
4 Press
5
or
∞
to select “TIMER REC
SPEED.”
5 Press
OK/
3
.
Each time you press the button, the
setting changes.
AUTO:
Select this to allow the VCR to
change the tape speed from SP to
SLP or LP when there is not
enough tape length remaining.
MANUAL:
Select this not to allow the VCR to
change the tape speed.
6 Press
EXIT/STATUS
to exit from
the menu operations.
To check, edit or erase the programmes
1 Turn on the VCR and TV.
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 30
STOP +/– 09 : 30
REC SPEED LP
DATE +/– 07/04/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 30
STOP +/– 09 : 30
REC SPEED LP
DATE +/– 07/04/98
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12
ONE TIME PROGRAM
PROGRAM 1
/–
START +/– 08 : 30
STOP +/– 09 : 30
REC SPEED LP
DATE +/– 07/31/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
12
PR CH START STOP DATE
1 L–F 08:00 10:00 D07/04
2 L–1 10:00 10:45 MON
3 10 11:30 01:00 DAILY
4 45 15:00 15:15 W09/04
5
6
7
8
NEXT= END=EXIT
PR CH START STOP DATE
1 12 08:30 09:30 D07/04
2 13 10:00 10:45 MON
3 10 11:30 01:00 DAILY
4 45 15:00 15:15 W09/04
5
6
7
8
NEXT= END=EXIT
1 2 3 4 5
VR788/888-55 NEW
6/3/99, 11:52 PM
21
