10
Quick Programming (cont’d) 39
10
Press the POWER button to turn off the VCR. The
r
light
will appear on the display panel. (The
r
light and the Cassette
Inside light will flash when you turn off the VCR if there is not a
tape in the VCR.) The VCR must be turned off for a timer
recording to take place. If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on
your TV screen two minutes before a timer recording starts. To
remove the message, press the CLEAR button.
9
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING will
appear on-screen. If PROGRAM NOT COMPLETED appears, try
again from step 1.
8
• If you want to record the program one time only, go to
step 9. You may also press the Number 8/DAILY or 9/WEEK-
LY button repeatedly to select a ONE TIME PROGRAM.
• If you want to record the program daily, press the
Number 8/DAILY button. The VCR will record a program
every day from Monday through Friday, starting at the same
time and recording for the same length of time.
• If you want to record the program every week, press
the Number 9/WEEKLY button. The VCR will record a
program on the same day at the same time and for the same
length of time, every week.
DAILY PROGRAM (MON-FRI)
PROGRAM
1
C/– 12
START +/–
08:00 PM
STOP +/–
10:00 PM
REC SPEED
SLP
DATE +/–
07/31/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
7
Press the Number 3/DATE+ or Number 6/DATE– button
to set the recording date. Every time you press a button, the
date changes in one-day increments. If you press and hold a but-
ton, the date changes quickly. The day of the week will appear
automatically. (You cannot program the VCR to record more than
one year in advance.)
ONE TIME PROGRAM
PROGRAM
1
C/– 12
START +/–
08:00 PM
STOP +/–
10:00 PM
REC SPEED
SLP
DATE +/–
07/31/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
• If the preset time for a timer record-
ing comes up during a One-Touch
Recording, the OTR has priority.
• If you leave the VCR on past the
scheduled start time of a timer
recording, you will not be asked
again to turn off the VCR. When you
turn off the VCR, the timer recording
will not take place. The VCR may
reprogram the recording for the
same day and time in the next year.
• If the end of the tape is reached dur-
ing a timer recording, recording will
stop. The VCR will eject the tape,
then turn itself off.
• If PROGRAM NOT COMPLETED/
CLASH appears at step 9, the timer
recording you just programmed over-
laps another timer recording. The
time recording you just programmed
will not take place. The time record-
ing menu will reappear. To cancel a
timer recording, see page 40.
Helpful Hints
–
+
J
........
–
+........
1
4
7
SPEED
CBL/DBS
TV
VCR
MENU
EXIT/STATUS
TIMER
SKIP
JOG/SHTL
STILL/SLOW
–
STOP
L
PLAY
:
+
3
FWD
REV
2
c
c
EJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CH
VOL
REW
FF
/OK
VCR/TV
7;;
INDEX
::7
AUDIO/MUTE
::
;;
REC
/OTR
8
7
9
VRZ364/VRZ344 4/7/99 8:11 PM Page 39
