Philips Wireless Router SNB5600 User Manual Download | Manualshive

Page: 19 / 22

background image

Technical data

17

5

Technical data

Ports

• Four 10/100Mbps Rj-45 Ports

Management Features

• Firmware upgrade via web based management
• Web based management (configuration)
• Power indicators
• Event and history logging
• Network ping

Security Features

• Password protected configuration access
• User authentication (PAP/CHAP) with PPP
• Firewall NAT NAPT
• VPN pass through (IPSec-ESP Tunnel mode, L2TP, PPTP)

Wireless Security

• WEP 64/128 bit
• WPA/WPA2
• WPA/WPA2-Personal (PSK)
• WPA-PSK with TKIP
• WPA2-PSK with AES
• WPA-PSK + WPA2-PSK with TKIP+AES.AES, or TKIP

LAN Features

• IEEE 802.1d (self-learning transparent Bridging)
• DHCP Server
• DNS Proxy
• Static Routing, RIPv1 and RIP

Radio Features

• Wireless RF module Frequency Band
• 802.11g Radio : 2.4GHz
• 802.11b Radio : 2.4GHz
Europe - ETSI
• 2412~2472MHz (Ch1-Ch13)

Modulation Type

• 802.11g : OFDM (BPSK, QPSK, 16- and 64-QAM)
• 802.11b : CCK (11 Mbps, 5.5 Mbps), DQPSK (2 Mbps)

Operating Channels IEEE 802.11g

• 13 channels (ETSI)

Operating Channels IEEE 802.11b

• 13 channels (Europe)

Transmit Power and Sensitivity

Tx Output Power : (Typical)
• 11b : 18.5 +/- 1 dBm
• 11g : 14.5 +/- 1 dBm@54Mbps

RF Output Power Modulation Rate - Output Power (dBm)

• 802.11b - 1Mbps (16dBm)
• 802.11b - 2Mbps (16dBm)
• 802.11b - 5.5Mbps (16dBm)
• 802.11b - 11Mbps (16dBm)

Modulation Rate - Output Power (dBm)

• 802.11g - 6Mbps (15dBm)
• 802.11g - 9Mbps (15dBm)
• 802.11g - 12Mbps (15dBm)
• 802.11g - 18Mbps (15dBm)
• 802.11g - 24Mbps (15dBm)
• 802.11g - 36Mbps (15dBm)
• 802.11g - 48Mbps (15dBm)
• 802.11g - 54Mbps (15dBm)

Sensitivity Modulation Rate - Receiver 2.412~2.484 GHz
Sensitivity (dBm)

• 802.11b - 1Mbps (90dBm)
• 802.11b - 2Mbps (88dBm)
• 802.11b - 5.5Mbps (85dBm)
• 802.11b - 11Mbps (84dBm)

Modulation Rate - Receiver Sensitivity Typical (dBm)

• 802.11g - 6Mbps (88dBm)
• 802.11g - 9Mbps (87dBm)
• 802.11g - 12Mbps (84dBm)
• 802.11g - 18Mbps (82dBm)
• 802.11g - 24Mbps (79dBm)
• 802.11g - 36Mbps (75dBm)
• 802.11g - 48Mbps (68dBm)
• 802.11g - 54Mbps (68dBm)

Environmental

Complies with the following standards :

Temperature : IEC 68-2-14

• 0 to 50 degrees C (Standard Operating)
• -40 to 70 degrees C (non-operation)

Humidity

• 10% to 90% (non-condensing)

Vibration

• IEC 68-2-36, IEC 68-2-6

Shock

• IEC 68-2-29

Drop

• IEC 68-2-32

Input Power

• 9V DC

IEEE standards

• IEEE 802.3, 802.3u, 802.11g, 802.1d
• IUT G.dmt
• IUT G.Handshake
• IUT T.413 issue 2 - ADSL full rate

Standards, Conformance Electromagnetic, Compatibility

• CE, ETSI, R&TTE, ETS 300 328, ETS 300 826

Safety

• EN60950

«
...
17
18
19
20
21
...
»

Summary of Contents for Wireless Router SNB5600























Reviews:

No comments

Related manuals for Wireless Router SNB5600

Brand: Dacor Pages: 4

THINKPAD I 1200 -

Brand: IBM Pages: 233

Brand: IFO Pages: 8

Brand: Warrior Products Pages: 2

MIW-DUAL-SIGNAL-BAY

Brand: Panamax Pages: 2

Brand: Oki Pages: 20

21 COVERT Series

Brand: Code 3 Pages: 16

Brand: aci Pages: 8

BACnet / Modbus IMMERSION Series

Brand: aci Pages: 8

Brand: aci Pages: 4

Brand: Prorack Pages: 14

Brand: BrandMotion Pages: 8

Brand: SICK Pages: 119

Brand: Pyle Pages: 4

Brand: iBeam Pages: 2

Brand: Duramaxx Pages: 44

Brand: Anslut Pages: 6

BTFREQ PRO BTFMPD3SR

Brand: Scosche Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands