Getting started
7
3.4
Install a WiFi device
If you want to install a WiFi device you have to retrieve your wireless
security settings using your installation CD ROM on the computer
where you installed your gateway and by clicking on the security icon
of the menu page.
3.4.1 Install a Wireless USB adapter SN
U
5600
If you have bought the starter kit SNK5600, the Wireless USB adapter
SN
U
5600 is part of the box content. In that case you just have to insert
the installation CD ROM, provided with your SNK5600, and follow the
instructions on the screen.
You can either install your Wireless USB adapter on the same PC than
the Wireless Router or on another PC.
3.4.2 Install another WiFi device
Refer to the manual of the other WiFi device
Note
If you have previously secured your network (see 3.2 step 12) through
the easy installation, the name of your network (SSID) will be
"PHILIPS_xxxxxx".
If not secured previously through the easy installation, the SSID will be
"philips_install".
In case you have given another name to your network, bear in mind that
this name will be displayed instead of the "PHILIPS_xxxxxx" or
"philips_install".
Note
At any time you can retrieve your wireless security settings using your
installation CD ROM on the computer where you installed your
gateway and by clicking on the security icon
of the menu page.
1
