47
EN
EN
EN
EN
d)
LED will flash slowly to confirm the system is armed. If any door is open during arming, the
siren chirps 5 times and lights flash 6 times, LED will flash quickly, but the system will be
armed anyway.
Sensor Temporary Bypass
The sensors can be bypassed temporarily until the next arming of the system; operations are as
follows:
a. Press the button
to arm the system
b. Within 3 sec. press button
The parking lights flash once and siren chirp once to confirm the sensors has been bypassed.
1.2
Silent arming
a)
Press the button
.
b)
Lights will flash, but the siren will not chirp.
c)
Doors will lock, immobilizer will activate.
For silent disarming press the button
.
To bypass sensors temporarily, press the button
within 3 seconds after arming.
1.3
Last door arming
If ignition is turned OFF and the door is opened and closed, system will enter arming mode
automatically after predetermined time (option 6). If during this period door or trunk is opened,
countdown will reset. Activation of the AUX output will not reset countdown of arming.
By pressing the button
countdown will be cancelled. After this, arming is possible only
manually.
1.4
Auto rearming
If within 30 seconds after disarming are not opened any door, trunk or ignition switched on,
systems will automatically arm again. This function is optional (option 13).
1.5
Disarming
Condition: Armed
a)
Press the button
.
b)
Siren will chirp 3 times (optional setting) and lights will flash 3 times.
c)
Doors will unlock and immobilizer turns off.
d)
When Auto rearming function is activated, LED will be flashing quickly for 30 seconds or
until opening the door.
1.6
Alarm
If during arming mode is car attacked, siren will go off, lights will flash and pager output will be
activated. You can select from 4 different types of siren sound to differentiate your car from the
others (option 5).To stop the sound of siren, press any button on remote controller. The systems
will remain armed. To disarm system during alarm, press the button
2 times.
1.7
Alarm limitation number
If any of sensors is constantly triggering the alarm, can be automatically bypassed after
determined number of alarms caused by this sensor. This sensor will be inactivated, while all
other sensors remain active. If there will be alarm triggered by any other sensor, inactivated
sensor will automatically activate again. Number of maximum consequent alarms triggered by
one sensor is set in option 4.
