Important Safety Information
WARNING:
Before installing and using the Inverter, you need to read the following safety
information carefully.
1. General Safety Precautions
Do not expose the Inverter to rain, snow, spray or dust. To reduce risk of hazard, do not
cover or obstruct the ventilation openings. Do not install the Inverter in a zero-
clearance compartment. Over heating may result.
To avoid risk of fire and electronic shock, make sure that existing wiring is in good
electrical condition; and that wire gauge is not undersized. Do not operate the Inverter
with damaged or substandard wiring.
This equipment contains components which can produce arcing or sparks. To prevent
fire or explosion do not install this equipment in rooms containing batteries or
flammable materials or in locations which require ignition protected equipment. This
includes any space containing gasoline-powered machinery, fuel tanks, or joints,
fittings, or other connection between components of a fuel system.
2. Precautions When Working with Batteries
If battery acid gets in contact with your skin or clothes, immediately wash with soap
and rinse with water. If acid enters eyes, immediately rinse the eyes with running cold
water for at least 20 minutes and get medical attention immediately.
Never smoke or allow sparks or flame in vicinity of battery or engine.
Do not drop metal tools on the battery. The resulting spark or short-circuit on the
battery or other electrical part may cause explosion.
Remove personal metal items such as rings, bracelets, necklaces, and watches when
working with a lead-acid battery. A lead-acid battery produces a short-circuit current
high enough to weld a ring or the like to metal, causing severe burns.
Introduction
NOTE:
Inverters demand high current from the low voltage DC Energy Source, like a battery
for instance, and due to this fact should NOT be connected to the load output terminals of
charge controllers (normally used in PV systems, for instance). Inverters have to be
connected directly to the battery poles as indicated in this Manual.
1. Features
This power inverter represents the most advanced DC to AC conversion technology. it
comes with a number of outstanding features, such as:
Pure sine wave output (THD < 3%@ linear load)
Output frequency: 50 / 60Hz switch selectable
Output power saving mode selectable
Input & output completely insulated design
High efficiency
Capable of driving inductive & capacitive loads from the start moment.
LED Indicators with twin color display all operation status.
16
ENG
Summary of Contents for SI700-12110
