CF CRIMPHANDY
12
PHOENIX CONTACT
105555_en_07
2.2
Switching on the crimping tool
Switching on the crimping tool
•
Press the ON button briefly. The green indicator light flashes.
The crimping tool is ready for use. The yellow light flashes if no
taped ferrule is inserted.
•
If the ON button is held down longer when switching on, the
three indicator lights indicate the charging state of the battery.
–
Green on = battery full
–
Yellow on = battery half full
–
Red on = battery almost empty
Troubleshooting
•
When the green and red indicator lights flash simultaneously,
the battery is empty. Follow the instructions for charging the
•
If the yellow indicator light flashes, follow the sequence for in-
serting a taped ferrule (see Page 13).
Switching off the crimping tool
•
Press the ON button for approx. three seconds. The three indi-
cator lights briefly show the charging state of the battery.
After approximately five minutes of no activity, the crimping tool
switches itself off automatically.
Summary of Contents for 1212463
Page 2: ......
Page 36: ...CF CRIMPHANDY 36 PHOENIX CONTACT 105555_en_07 ...