Installation and Commissioning
107460_en_00
PHOENIX CONTACT
31
2.4.2
Settings and Functions
2.4.2.1
Basic Settings
This category offers the following functions:
–
Configure the dynamic / static IP address
–
Start of OPC resource editor
Use Dynamic IP (DHCP)
1.
Select the radio button to automatically receive the network configuration from the
DHCP server.
2.
Confirm your selection with the green check.
Use Static IP
1.
Select the radio button to assign an IP address and subnet mask to the operating de-
vice.
2.
Confirm your selection with the green check.
Start OPC Resource Editor
1.
Press the
Start OPC Resource Editor
button.
The OPC resource editor is started.
2.
Add new resources or edit the settings of an existing resource.
3.
Press the
OK
button.
4.
Confirm your selection with the green check.
Some settings are password-protected. The default password is "+-+-".
Note that the IP address is only indicated if the operating device is physically connected
to the network.
Note that the IP address is only indicated if the operating device is physically connected
to the network.
Summary of Contents for 2403459
