onlinecomponents.com
MCR-SL-D-FIT
102526_01_en
10
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany
Phone: +49-(0) 5235-3-00 • Fax: +49-(0) 5235-3-4 12 00
www.phoenixcontact.com
10.4.4 Operating Mode
*0; 0.1; 0.01; 0.001 0.001 means: Counting in 0; 0,1; 0,01;
0,001 units of time
10.4.5 Decimal Point
The decimal point defines the resolution of the displayed
value.
10.4.6 Reset Mode
10.4.7 End of Programming
Timing in s (accuracy de-
pending on position of
the decimal point*)
Timing in h:min:s (deci-
mal point will be ignored)
Timing in h (accuracy de-
pending on position of
the decimal point*)
Timing in min. (accuracy
depending on position of
the decimal point*)
0 1
0.0 1/10 (0,1)
0.00 1/100 (0,01)
0.000 1/1000 (0,001)
Manual reset (left key)
and electrical reset
Manual reset only
No reset (left key and
reset input locked)
Electrical reset only
Programming routine
will be left and the new
parameters will be
stored.
Afterwards the device is
ready to use.
Programming routine
will be passed through
once again. All parame-
ters can be checked.
