onlinecomponents.com
MCR-SL-D-FIT
102526_01_en
PHOENIX CONTACT
5
6
Setting of the Operating
Parameters
•
Hold down keys on front panel and switch on
supply voltage.
The display shows:
After releasing the keys the display alternates between
menu title and corresponding menu item with a fre-
quency of 0.5 Hz. After any key is pressed, only the
menu item is displayed.
•
Pressing the right key, the menu item will be
switched
to next value
.
To input
numerical values
(e. g. for scaling factor), se-
lect first the decade with the left key. The decade
blinks. Set now the numerical value using the right key
•
Hold down the left key and press the right key to
switch
to the next menu title
.
•
After programming the last menu item, the
program-
ming routine will be left
(menu "EndPro") and the
new values will be stored by switching the menu item
to "YES". If you chose "NO", the programming routine
will be passed through once again.
7
Programming Routine
The first menu item is the basic function.
7.1
Operating Mode
8
MCR-SL-D-FIT as Pulse Counter
(Adding Counter and Position
Indicator)
8.1
Description
–
6-digit adding counter, resettable
–
LED display with 8 mm high characters and very high
luminosity
–
Display range -199999...999999 (overflow condition
will be indicated by flashing of the display)
–
Programming of count functions and operating param-
eters via the setting keys. During programming the dis-
play guides the user with text prompts.
–
Optocoupler output (as option). Active at count values
≤
0.
–
Programmable features:
8.2
Inputs
INP A
Dynamic count input. Max. count frequency 30 Hz or
20 kHz programmable via set up
INP B
Dynamic count input. Max. count frequency 30 Hz or
20 kHz programmable via set up
SET/RESET
Dynamic set input. Linked to the red set key.
8.3
Optocoupler Output
Active if count value
≤
0. Simple preset counter can be re-
alized, when using subtract mode.
Operating mode
Pulse counter
(see
page 5)
Time meter
(see
page 9)
Frequency counter
(see page 7)
–
Input polarity (npn or pnp)
–
Max. count frequency (30 Hz or 20 kHz)
–
Input mode
–
Scaling factor
–
Decimal point
–
Reset mode
manual and electrical
no reset
electrical
manual
–
Set point
