Startup and functions
7190_en_02
PHOENIX CONTACT
3-7
Figure 3-5
Access point or client login page
By default upon delivery use the following settings:
User name:
admin
Password:
admin
3.3.1
General information about configuration
All modifications to the configuration become active when "Apply Settings" is clicked. Since
modifications to the configuration are accepted without a device reset, each configuration
modification only takes a short amount of time.
Until this point, the modified configuration is only saved temporarily. Only temporarily, but
not permanently saved modifications are indicated by a flashing floppy disk icon in the top
right corner (see arrow in Figure 3-6).
To save the configuration permanently, click on "Apply Settings" in the
"Settings/Configuration/General" menu, otherwise all the modifications will be undone
following a device reset.
As soon as there are any configuration settings that are not permanently saved, the floppy
disk icon in the top right corner flashes as a reminder (see arrow in Figure 3-6). Observe
the save options described in "Meaning of the two "Save and apply" options" on
page 3-24.
