Technical data
7190_en_02
PHOENIX CONTACT
4-1
4
Technical data
General data
Function
Wireless access points or clients; conform to standard IEEE 802.11b/g
Housing dimensions (width x height x depth) in mm
External dimensions without antenna
250 x 160 x 65
External dimensions with two antennas
427 x 337 x 65
External dimensions with four antennas
604 x 337 x 65
Permissible operating temperature
-20°C to +55°C
Permissible storage temperature
-40°C to +70°C
Degree of protection
IP65
Humidity
Operation
10% to 85%, no condensation
Storage
10% to 85%, no condensation
Mounting position
Any
Connection to protective earth ground
By fixing the mounting plate onto a grounded mounting surface or via eyelet
rings in the wiring space
Configuration
Web-based management via http or https, password-protected
Weight
1000 g, typical
Supply voltage
Connection
Via COMBICON; conductor cross-section = 2.5 mm
2
, maximum
Nominal value
24 V DC
Permissible voltage ranges
18.5 V DC to 30.5 V DC
Current consumption at 24 V
400 mA, recommended fuse: 2 AT
Power over Ethernet
According to IEEE 802.3af
Protection class
III
Interfaces
RJ45 Ethernet interface
Number
1
Connection format
RJ45 female connector on the device
Data transmission rate
10/100 Mbps
Segment length
100 m
Wireless interface
Wireless standards
IEEE 802.11a/b/g/h
Automatic or manual channel selection
2.4 GHz: 13 channels according to 802.11b/g
5 GHz: Up to 19 channels according to 802.11a in accordance with standard
802.11h
Data transmission rate
According to 802.11b (11 Mbps), according to 802.11g (54 Mbps), 802.11a/h
(54 Mbps), automatic rate selection (ARS) or fixed rates
Maximum transmission power at the R-SMA connection
For 802.11a: 18 dBm at 6 Mbps, 12 dBm at 54 Mbps
For 802.11b: 19 dBm
For 802.11g: 19 dBm at 6 Mbps, 14 dBm at 54 Mbps
