5756B
1
General Notes
Unless mentioned otherwise, all information in this guide
refers to the IBS S7 300 DSC-T controller board, Order No.
27 19 97 5.
When using this guide, please observe the following notes:
The attention symbol refers to an operating procedure
which, if not carefully followed, could result in damage
to equipment or personal injury. The symbol is always
located to the left of the tagged text.
The note symbol gives you tips and advice on
hardware and software optimization. In addition, text
marked in this way informs you of system-related
conditions that must strictly be observed to achieve
error-free operation. The symbol is also used to clarify
terms.
The text symbol refers you to detailed sources of
information (manuals, data sheets, literature, etc.) on
the subject matter, product, etc. This text also
provides helpful information for the orientation in the
manual.
Right and secure use of the product requires proper transport,
storage, mounting and assembly, as well as, careful
operation and installation. The use of this product is only
allowed to qualified personnel authorized to start up, to
ground and to mark devices, systems and electric circuits
according to the standards of safety technology. Phoenix
Contact assumes no liability for damage or personal injury
resulting from disregard of notes and safety guidelines
contained in this manual.
Please note that software/hardware designations and brand
names of the companies mentioned are, as a rule, protected
by copyright, trademark or patent.
Current Phoenix Contact product information is also available
on the Internet at: www.phoenixcontact.com.
