SD FLASH 512MB MODULAR MUX
24 / 56
PHOENIX CONTACT
105752_en_03
Figure 3
-
17
“Set IP Address of ILC 131 ETH” page
•
In the “Local PLC” area, set the IP address, the subnet mask and the gateway address
for the Inline controller for which you have opened the multiplexer web interface.
•
In the “Remote PLC” area, enter the IP address of the other Inline controller.
•
To transfer the modified IP address to the Inline controller, click the “Send” button.
Once you have assigned the IP address to the first Inline controller (master), you must also
assign an IP address to the second Inline controller (slave). Sections
to
step by step how to proceed.
•
Go back to Section
•
Follow the instructions in Sections
to
•
Adhere to the sequence of the sections.
