SD FLASH 512MB MODULAR MUX
44 / 56
PHOENIX CONTACT
105752_en_03
I/O: digital inputs and outputs
I1 to I8
Yellow
Inputs 1 to 8
Off
Corresponding input is not set.
On
Corresponding input is set.
E
Yellow
Error
Off
No short circuit/overload at one output/several outputs
On
Short circuit/overload has occurred at one or more of the outputs 1 to 4.
Q1 to Q4
Yellow
Outputs 1 to 4
Off
Corresponding output is not set.
On
Corresponding output is set.
Table A
-
1
Diagnostic and status indicators of the Inline controller
Des.
Color
Status
Meaning
Table A
-
2
Diagnostic indicator on the IB IL 24 LPSDO 8 V2
-
PAC and IB IL 24 PSDI 8
-
PAC SafetyBridge modules
LED
IB IL 24 LPSDO 8 V2
-
PAC IB IL 24 PSDI 8
-
PAC
Meaning
P
Off
Off
No safe communication
On
On
Secure communication
Flashing
Flashing
Acknowledgment required
A network error occurred.
Flashing
Off
No safe communication
A network error has occurred.
Table A
-
3
Function description of the digital outputs
Output
Internal designation
Associated LED
Meaning
Q1
ONBOARD_OUTPUT_BIT0 Flashes at 1 Hz (1 s clock)
Device error on an INTERBUS device in the
connected bus (analog modules)
Flashes at 4 Hz (250 ms clock) Error on the slave (bus error, fault, system
failure, etc.)
Q2
ONBOARD_OUTPUT_BIT1 Flashes at 1 Hz (1 s clock)
Error when setting/reading the
IP address
Flashes at 4 Hz (250 ms clock) Error when reading/starting the bus config
-
uration
