TRIO-PS-2G/1AC/24DC/10/B+D
105897_en_00
PHOENIX CONTACT
4 / 26
Description
Type
Order No.
Pcs./Pkt.
Primary-switched TRIO POWER power supply with push-
in connection for DIN rail mounting, input: single phase,
output: 24
V
DC/10
A
TRIO-PS-2G/1AC/24DC/10/
B+D
2903145
1
3
Ordering data
Accessories
Type
Order No.
Pcs./Pkt.
Redundancy module, 12 V - 24 V DC, 2 x 20 A, 1 x 40 A
TRIO2-DIODE/12-24DC/
2X20/1X40
2907379
1
Redundancy module, 12 V - 24 V DC, 2 x 10 A, 1 x 20 A
TRIO2-DIODE/12-24DC/
2X10/1X20
2907380
1
Multi-channel, electronic device circuit breaker with active
current limitation for protecting four loads at 24 V DC in the
event of overload and short circuit. With nominal current
assistant and electronic locking of the set nominal
currents. For installation on DIN rails.
CBM E4 24DC/0.5-10A NO-R
2905743
1
Multi-channel, electronic device circuit breaker with active
current limitation for protecting eight loads at 24 V DC in
the event of overload and short circuit. With nominal
current assistant and electronic locking of the set nominal
currents. For installation on DIN rails.
CBM E8 24DC/0.5-10A NO-R
2905744
1
VARIOFACE module, with two equipotential busbars (P1,
P2) for potential distribution, for mounting on NS 35 rails.
Module width: 70.4 mm
VIP-2/SC/PDM-2/24
2315269
1
VARIOFACE module with push-in connection and two
equipotential busbars (P1, P2) for potential distribution, for
mounting on NS 35 rails. Module width: 57.1 mm
VIP-3/PT/PDM-2/24
2903798
1
The range of accessories is being continuously extended. The current range of accessories can be found in
the download area for the product.
