UM EN OPC 7015/OPC 7022
PHOENIX CONTACT
8155_en_00
1.5
S
TANDARDS
This device complies with the requirements and protective aims of the following EC
regulations:
This device meets the test requirements for granting the CE sign according to the
European test standards EN 61000-6-4 and EN 61000-6-2.
This device complies with the test requirements in accordance with EN 60950
(VDE0805, IEC950) "Safety of Information Technology Equipment"
The device meets the EN 60068-2-6 standard test requirements (sinus excitation).
The device meets the EN 60068-2-27 standard test requirements (shock resistance
test).
Note:
A respective conformity declaration for the authority in charge is available at the
manufacturer and may be viewed on request.
All connected components, as well as cable connections must also meet these
requirements for compliance with the EMC legislation. For this reason, screened bus and
LAN cables including screened connectors must be used and installed according to the
instructions in this user manual.
Pos: 9 /Datentechnik/Allgemeine Hinweise/Ausstattungsvarianten/Ausstattungsvarianten für OPC6000/7000 @ 2\mod_1265643750549_6.doc @ 7192 @
1.6
E
QUIPMENT VERSIONS
The system is available in two equipment versions:
Platform including a Flash SSD:
Without any rotating mass storage device (hard disk, etc.) and including an embedded
operating system (Windows CE / XP embedded) for stationary use.
Platform including a hard disc:
Equipped with a hard disk for stationary use with a standard operating system, e.g. for
applications in the manufacturing department.
Pos: 10 /Datentechnik/Allgemeine Hinweise/Lieferumfang/Lieferumfang für OPC7008 / 7013 / 7015 / 7022 @ 2\mod_1257320771863_6.doc @ 6773 @
1.7
S
COPE OF DELIVERY
Please check that all of the following components are contained in the packaging:
1 x device
With 24 V DC devices: 3-pin lead-through plug from Phoenix Contact,
3-pin 3.81
OPC7 with a screw connection
(already connected with
device socket)
Service CD
Optional delivery scope
Operating system
Pos: 11 /Datentechnik/Betriebshinweise/Betriebsort/Betriebsort für OPC-Serie / IPC- Serie / CPC- Serie / PLC-Serie / ITC-Serie / OTC-Serie @ 0\mod_1158827335567_6.doc @ 217 @
