UM EN OPC 7015/OPC 7022
PHOENIX CONTACT
8155_en_00
6
I
NTERFACES
6.1
I
NTERFACE SETUP
INTERFACE
IRQ
ADDRESS
COM1
4
3F8h-3FF
Pos: 27 /Datentechnik/Schnittstellen/Spannungsversorgung/Spannungsversorgung für OPC7000-Serie @ 2\mod_1270724385376_6.doc @ 7572 @
6.2
24
V
DC
POWER SUPPLY
This power supply is provided to the device by using a lead-through terminal with a screw
connection. (The figure shows the socket inside the device)
Technical data of the power adapter
Input voltage:
19…29 V DC
Max. switch-on current: 7A
(10ms)
Pos: 28 /Datentechnik/Schnittstellen/USB-Anschluss/USB-Anschluss für OPC / IPC / CPC / PLC / OTC / ITC / VMT / MSD-Serie @ 0\mod_1158923823971_6.doc @ 547 @
6.3
USB
CONNECTIONS
The USB interfaces are used for connecting peripherals with USB connection. The interface
complies with the USB 2.0 standard.
PIN NUMBER
SIGNAL NAME
1
VDC
2
D -
3
D+
4
GND
Note:
The USB interfaces can be locked by using the "Lock USB" software tool.
USB
CONNECTION IN THE FRONT PANEL
One USB interface can be accessed from the front. The interface is located under a plastic
cover underneath the display. The cover has a tab on the right-hand side, which is used
for opening. The plastic cover of the USB interface must be returned in protective position
after use.
Pos: 29 /Datentechnik/Schnittstellen/Netzwerkanschluss RJ45/Netzwerkanschluss RJ45 für OPC / IPC / CPC / PLC / OTC / ITC / VMT-Serie/LSI 5015 SEW @ 0\mod_1158924094127_6.doc @ 549 @
PIN NUMBER
SIGNAL NAME
1
24 V DC
2
PE
3
0 V DC
