Maintenance
MC11 Control Unit
30
66650 6.0
9. Maintenance
You should only use spare parts which have been manufactured or approved by DewertOkin.
Only these parts will guarantee a sufficient level of safety.
9.1
Maintenance
Type of check
Explanation
Time interval
Check the function and safety
of the electrical system.
A qualified electrician should carry
out this inspection. (Refer to the
"Electrical connection" section in
the "Installation" Chapter.)
Periodic inspections can
be carried out at intervals
based on the risk asses-
sment which you conduct
for your end product.
Look over the housing periodi-
cally for any signs of damage.
Check the housing for breaks or
cracks.
At least every six months.
Look over the plug-in connec-
tions and electrical access
points for signs of damage.
Check that all electrical cables
and connections are firmly seated
and correctly positioned.
At least every six months.
Look over the cables for any
signs of damage.
Check the connecting cables for
pinching or shearing. Also check
the strain relief and kink protec-
tion mechanisms, in particular af-
ter any mechanical load.
At least every six months.
Check periodically to see if the
rechargeable battery is ready
and operational. (Battery is op-
tional)
If you can no longer move the dri-
ve in both directions with a fully
charged battery, then you should
replace the battery.
At least every four weeks.
