Unfold the triangular set and first fasten the screw to what will later be the top edge of the module (1). Then fasten
another screw to what will later be the bottom edge of the module (2) (see Figure 3). To improve accessibility of the
screw, lift the ground joint to one side (see Figure 4).
Figure 4: Lifted ground joint for attaching the module
Important:
Make sure the connection socket is in the correct position in order to guarantee problem-free module
wiring at a later stage (see Figure 5).
Figure 5: Position of the connection socket
Status 04/12 – Subject to errors and technical modifications
Phoenix Solar AG, Hirschbergstrasse 8, 85254 Sulzemoos, Germany, Phone +49 (0)8135 938 -0, Fax +49 (0)8135 938 - 999
Page 10 of 27
