background image

Owner’s Manual — Phoenix 230V 50Hz Axial Air Mover

Installation, Operation & Service Instructions

1

www.UsePhoenix.com • sales@UsePhoenix.com

Toll-Free 1-800-533-7533 or 1-608-237-8400

Read and Save These Instructions

The Phoenix 50Hz Axial Air Mover is the industry’s only Air Mover specifically engineered with patent pending 

FOCUS

TM

 Technology. FOCUS

TM

 Technology revolutionizes evaporative drying by producing air velocities greater 

than competitive product offerings. This highly focused air flow is directed towards the restoration industry’s 

problematic drying areas namely, carpet and cushion, sub-floor, sill plate and walls. No other fan dries the 

sill plate as quickly! Finally, the Phoenix 50Hz Axial Air Mover with FOCUS

TM

 Technology sustains these air 

velocities further than any other 50Hz Axial Air Mover.  
The Phoenix 50Hz Axial Air Mover includes a 2-speed motor 

delivering a focused airstream of approximately 4900 m3/hr 

(2900 cfm), lightweight stackable enclosure designed to fit existing 

vehicle rigging, superior cord management and hour meter. 
Conventional 50Hz Axial air movers create a circular air jet. With 

a circular air jet the only way to get air into the square corner is to 

point the fan towards the corner. This angle toward the wall wastes 

valuable air velocity and throw distance. FOCUS

TM

 Technology 

creates an air jet with a square corner, resulting in optimized 

drying ability. In addition, the 50Hz Axial Air Mover features built in 

4.5° positioning which increases the fans ability to dry.
Dry fast, smart and profitably with Phoenix.

 Phoenix 50Hz Axial Air Mover

•  Approximately 4900 m3/hr (2900 cfm) air flow 

directed where you need it. 

•  Operator interface conveniently located for easy 

access, featuring: power indicator lamp, large three-

position switch, and hour meter.

•  Units interlock for ease of stacking during storage and 

handling.

•  Weighs more than 1kg less than competitive units.
•  Linear low density polyethylene construction.
•  Low bearing temperatures increase motor life.

Specifications subject to change without notice.

4201 Lien Rd • Madison, WI 53704

TS-699

01/13

Patent: 7,331,759

Phoenix 50Hz Axial Air Mover

PN 4030940

Summary of Contents for 4030940








Reviews: