PAGE # 5
Call 1-877-744-3649 for assistance or visit us at www.phoenixinno.com
STEP 6:
Assemble
BBQ
grill
head
1.
Note: 2 people are required for this step.
2. Rest BBQ grill head (S) onto cabinet frame. Ensure that the hose and regulator
(or natural gas hose assembly for Model PH603SBN) sits inside the cabinet.
(See Fig. 7)
Ensure that the holes in the grill head line up with the “L” brackets extending
from the cart frame legs.
(See Fig. 7.1)
3. Insert 4 medium bolts through “L” brackets and
into BBQ grill head (S).
STEP 7:
Attach right side shelf
NOTE: PLACE ON CARDBOARD OR CLOTH
TO PROTECT PAINT/STEEL FINISH.
1. Insert 2 medium bolts through right side shelf top (W) into
right side shelf front (X) and tighten.
(See Fig. 8)
2. Loosen 2 bottom bolts already installed in the side burner (J-1).
DO NOT REMOVE.
(See Fig. 8.1)
3. Place right side shelf onto the side burner (J-1) by lining up 2 bottom
keyholes in right side shelf (W & X) with 2 bolts loosened from the side burner (J-1).
Lower the side shelf into place.
(See Fig. 9)
DO NOT TIGHTEN BOLTS.
4. From the inside of the side burner (J-I), use 3 medium bolts and large washers to secure
assembled side shelf. Tighten once in place.
(See Fig. 9)
5. Tighten the 2 bottom bolts from steps 2 and 3.
6. Secure right side shelf front (W) to BBQ grill head (S) with 1 medium bolt.
(See Fig. 9)
For Models:
PH603SB
PH603SBN
Fig. 7.1
Fig. 7
Fig. 8
Fig. 8.1
Fig. 9
W
X
LIFT
FROM
HERE
LIFT
FROM
HERE
S
J-1
J-1
J-1
S
