PAGE # 8
Call 1-877-744-3649 for assistance or visit us at www.phoenixinno.com
STEP 13:
Attach gas supply
FOR PROPANE MODELS:
1. Lift tank support wire (O) and position LP gas cylinder in the opening
on bottom panel.
(See Fig. 17)
2. Lower tank support wire (O) over the LP gas cylinder collar and secure.
(See Fig. 18)
3. Attach regulator to LP tank (see “LP Gas Cylinder” section of this manual
for proper assembly instructions).
FOR NATURAL GAS MODELS:
1. Feed the natural gas hose through the opening of the back panel (M).
(See Fig. 19)
2. Attach the hose of the appliance to your natural gas supply.
3. Refer to “Natural Gas Supply Connection” section of this manual
for proper assembly instructions).”
STEP 12:
Install cooking
components
1. Place heat tents (E-1) into slots located in front of grill head (S)
and lower over each burner.
2. Insert cooking grids (F-1), warming rack (H-1) and side burner grate (I-1)
3. From behind the grill, install the drip tray (N-1) by sliding it into place onto the
2 channels located on the bottom of the grill head (S).
(See Fig 16.1)
4. For battery installation in each grill light,
refer to Page 10, Fig. 3 & 4.
For Models:
PH603SB
PH603SBN
Fig. 16
Fig. 16.1
Fig. 17
Fig. 18
Fig. 19
N-1
M
