3. Installing the landing gear and nose gear.
4. Installing the horizontal and vertical stabilizer.
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Cut away the aileron pushrod.
Bend "L" the aileron pushrod.
Attach the nylon clasp to the aileron
servo arm.
The landing gear.
Remove the covering from the bottom
of the wing.
Drill four holes for the nylon straps.
Install the collar.
The nose gear.
Install the wheel.
Install the nose gear.
Install the wheel.
Install and secure the landing gear.
Draw a center line.
Remove the covering from the fuselage.
Attach the horizontal to the fuselage and
check it.
Nylon clasp
Collar
Collar
Gear
Nylon strap
tiger
3
Instruction Manual
