background image

42

43

With the CE symbol, Phonak AG confirms that 
this Phonak product – including accessories 
– meets the requirements of the Medical 
Devices Directive 93/42/EEC as well as the 
R&TTE Directive 1999/5/EC on radio and 
telecommunications equipment. The numbers 
after the CE symbol correspond to the code of 
certified institutions that were consulted under 
the above-mentioned directives.

This symbol indicates that the products 
described in these user instructions adhere to 
the requirements for an applied part of Type B 
of EN 60601-1. The surface of the hearing aid is 
specified as an applied part of Type B.

Indicates the medical device manufacturer, as 
defined in EU Directive 93/42/EEC.

16.  Information and description 

 

of symbols

This symbol indicates that it is important for 
the user to read and take into account the 
relevant information in these user guides.

This symbol indicates that it is important for 
the user to pay attention to the relevant 
warning notices in these user guides.

Important information for handling and 
product safety.

This symbol confers that the electromagnetic 
interference from the device is under limits  
approved by the US Federal Communications 
Commission.

Indicates the manufacturer’s serial number so 
that a specific medical device can be identified.

Indicates the manufacturer’s catalogue number 
so that the medical device can be identified.

Summary of Contents for Audeo B50-R

































Reviews: