14
15
5. Batteries
Remove the
sticker from the
new battery and
wait two minutes.
Open the
battery door.
Place battery in
the battery door
with the “+”
symbol facing
upwards.
If it is difficult to close the battery door, check that
the battery is inserted correctly and the “+” symbol
is facing upwards. If the battery is not inserted
correctly, the CROS device will not work and the
battery door could be damaged.
Low power: You will hear two beeps when the battery
is low. You will have approximately 30 minutes to
change the battery (this can vary, depending on the
hearing aid settings and battery). We recommend that
you always have a new battery on hand.
1.
2.
3.
Please ensure you use the correct type of battery in
your CROS device (zinc-air). Please also read chapter
20.2 for further information on product safety.
Replacement battery
This CROS device requires a 13 zinc-air battery. Identify
the correct battery size by checking the following table.
Model
Phonak CROS
P-13T
Zinc-air
battery
size
13
Color
marking on
package
orange
IEC
code
PR48
ANSI
code
7000ZD
