25
For professionals:
Changing the FM channel
If the radio channel used in EasyLink is frequently
disturbed by an external source of interference, the
hearingcare professional can switch the EasyLink to
another radio channel.
1) Switch on the EasyLink by pressing
the button for two seconds
2) Using a pen, press the push button, as pictured.
After one second, the channel displayed in the LCD
will change. Hold the button down until
the desired channel is displayed.
3) Release the button.
The channel number in
the LCD will stop
blinking after a few
seconds.
4) Set the default channel
of the iLinks or
MicroLink receivers to
the same channel using
the FM Successware.
