9
Attaching the SlimTip to the receiver
1.
Slide the receiver into the sleeve of the handling
tool, ensure the receiver label (e.g. 0M) is visible and
facing upwards, and the receiver cable is extending
upwards. Note that the tool has three different
sized sleeves to accommodate S, M and P receiver
housings.
3.
Gently insert the receiver spout into the SlimTip Link
until you feel it click into place securely.
2.
Hold the SlimTip firmly with one hand, with the other
hand insert the receiver using the handling tool.
Note that the printed label on the SlimTip faces
the opposite direction to the receiver label.
4.
Gently slide the tool away from the receiver.
Summary of Contents for SDS 4.0 Fit & Go
Page 2: ...SDS 4 0 Tips and Tricks...
