Wall Mounting
The PMP-3850 telephone may be installed onto tw o screws (not included) fas-
tened into the wall. When installing screws into plasterboard walls, use wall
anchors (not included) to ensure that the scre ws remain secure. Insert the
screws into the wall leaving 3/16" of each screw extending out from the wall.
See the wall mount template on page 45 to proper ly space the screws in the
wall for mounting. The PMP-3850 is not compatible with mounting on a
standard telephone wall plate.
Wall Mounting Instructions:
1. Remove the handset from the
base.
2. Turn the base over so the under-
side of the base faces you.
3. Adjust the base to the w all mount
position.
4. Plug the supplied 7-foot telephone
cord into the
LINE
jack on the
telephone.
5. Connect the telephone line cord
to the wall jack.
6. Insert the AC adapter into the
9V
DC
jack on the top of the base .
7. Run the cables down through the cable channel to allow for flush wall
mounting.
8. Slip the telephone base onto the w all, lining up the w all mounting holes over
the screws. Slide the telephone base down so it is firmly in place.
9. Return the handset to the telephone base .
10. Plug the other end of the A C adapter into the AC outlet.
14
TELEPHONE SETUP
Caller ID allows the caller's name and phone number to be shown on the display
before you answer the call. In order to use this feature you must first subscribe
to Caller ID service with your telephone company.
When You Receive a Call
1. When the telephone rings, the caller's name and
phone number appears on the display.
2. The new Caller ID record includes the name and number of the caller and
the time and date the record is received. The New Call light will flash to
indicate that you have a new Caller ID call stored in memory.
Note:
When the Caller ID information is received, it is stored in memory so that
this information can be recalled for later use. Up to 80 Caller ID calls
can be stored.
Viewing the Caller ID List
This phone automatically stores the last 80 calls received. If a call is received
from the same number more than once since the records were last viewed, no
new entry is made, but the repeat call icon ( "
RPT"
) is displayed.
CALLER ID
1. With the handset idle press
or .
2. Any unviewed (new) calls will be displayed first. The
most recent call will be displayed. The information on
the call will be displayed with the name, number, date,
and time that the call was received.
3. To scroll to the next call, press or . The will go
through the calls from the last call received to the first.
The
will allow you to view the calls from the first call
received to the last.
4. If the name or number is more than 11 characters,
press the or button to view the rest of the display
(as indicated by the arrows in the top line of the
display).
5. Press to return to the idle display.
Talk
1
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
Menu
Redial
Flash
WXYZ
*
0
#
DIR
Delete
CHAN
Edit
Voice Mail
Save
PM
PM
DIR
33
