background image

Images from the camera motion detector

Here is how the images from your cameras will be used:

Images will only be transferred to our Alarm Receiving Centre in the event of an

alarm activation.

The images will only be used to evaluate and determine the cause of an alarm

activation.

Only our Alarm Operators and Gardaí (if necessary) will have access to the images

received.

IMAGES FROM THE CAMERA MOTION DETECTOR             

  5

4

CONTENTS

Contents

Signal lights on the keypad 

7

How to use the alarm system 

8–10

Activate using the keypad 

8

Activate

 using the remote control 

9

Deactivate using the keypad 

10

Deactivate using the remote control 

10

Siren and sound 

10

SOS function 

11

Portable voice unit 

11

Information about the most common alarm components 

12–13

Smart solutions 

14

Maintenance and advice

15

How to use the keypad

 

6

Images from the camera motion detector 

5

The camera motion detectors (infrared motion detectors with photo camera functionality) will take photos during an active alarm event. 

Depending on the configuration of the cameras, they may also take photos when the alarm system is disarmed. The photos taken when disarmed 
are not saved unless there is a sabotage-attempt or if the alarm is subsequently triggered, meaning that if the system is properly disarmed then 
the photos are not saved. Furthermore, the camera motion detectors will take photos if the smoke detectors detect smoke, in order for our Alarm 

Receiving Centre to verify if there is an emergency situation.

You may take photos through the camera motion detectors in Sector Alarm App when the alarm system is fully armed. Those pictures will not be 
available to our Alarm Receiving Centre.

For video cameras, the customer controls the access to the video recordings and real time video, and the Alarm Receiving Centre will only have 

access to such recording and real-time video during an active alarm event and only if the customer has explicitly consented in the app to share 

access to video material with the Alarm Receiving Centre.

Summary of Contents for Smart Alarm










Reviews: