Establishing a connection to your TV, pairing
The very first time your HearIt Media receiver is used with
the HearIt media TV adapter, the two devices must be
paired together.
Pairing
1. Press the
R1
button on the HearIt Media receiver for 5 seconds until the lights come on.
2. Place the HearIt Media receiver right next to the HearIt Media TV adapter (less than
30 cm / 1 ft. between the devices).
3. Connect the HearIt Media TV adapter to a mains wall outlet and turn the power on.
4. The two devices are now establishing a connection with each other. Wait one
minute.
5. After one minute, the HearIt Media TV adapter connects to the HearIt Media
receiver and the pairing is complete. The STATUS indicator on the HearIt Media TV
adapter will show a solid orange light.
Pairing should be completed only once and will normally not have to be repeated.
By pressing the receiver button R1 once, you can turn the sound on and off.
Max. 30 cm
Press the button
for up to 5 seconds
(until the lights come on)
* Plugs vary from country to
country
*
POWER
STATUS
Pairing
The two devices are
establishing connection;
wait 1 min.
Ready
The pairing is completed
when the indicator shows
solid light.
TV setup
2
4
5
1
3
10
POWER
STATUS
POWER
STATUS
