background image

(1) In any event, all warranty claims must be received within the applicable warranty  
  period for this warranty to be effective.
(2) The “Limited Product Warranties” and the ”Limited Peak Power Warranties” do not  
  apply to any Product(s) which have been subjected to:

  Misuse, abuse, neglect or accident;
  Alteration, improper installation or application;
  Non-observance of Phono Solar’s installation manual;  
  Impairments caused by external effects, such as e.g., dirt stains, smoke, damages  

  caused by salt, by chemicals not explicitly authorized for use, e.g. for cleaning.  
  Repair or modifications by someone other than an approved service technician of  
  Phono Solar;

  Power failure surges, lightning, flood, fire, accidental breakage or other events out  

  of Phono Solar’ s control; 

  Caused by external events including but not limited to defective equipment parts,  

  appliances, system components like, connecting cables, invertors, or the like,  
  which have been coupled with the Module by anyone other than Seller, or caused  
  by defective system design, configuration, or installation planning; 

  Removal of Modules and reinstallation at a new site;
  Installation on mobile platforms or in a marine environment; direct contact with  

  corrosive agents or salt water; pest damage; or malfunctioning system components;

  Alteration, removal or obliteration of the original Module label;
  Other events that are reasonably beyond the control of Phono Solar.

(3) Both the “Limited Product Warranties” and “Limited Peak Power Warranties” do  
  not cover any costs associated with installation, removal or re-installation of the  
  PV-modules and (except as explicitly set forth in the final paragraph of Section 5)  
  customs clearance or any other costs for return of the Product(s); .
(4) Both the “Limited Product Warranties” and “Limited Peak Power Warranties” do not  
  cover cosmetic blemishes associated with installation, or the normal wear and tear  
  of Phono Solar Modules.

Exclusions and Limitations

If, within a period of Twenty Five (25) years from the date of delivery by Phono Solar 
to the first buyer any Product exhibits a power output less than 80% of the minimum 
“Peak  Power  at  STC”1  as  specified  as  of  the  Phono  Solar´s  product  label,  provided 
that  such  loss  in  power  is  determined  by  Phono  Solar  (at  its  sole  and  absolute 
discretion) to be due to defects in material or workmanship, Phono Solar will, at its 
sole option, either 
(1) replace such loss in power by either (a) providing additional Product(s) to the  
  Customer to make up for such loss in power or (b) replacing the defective  
  Products(s) at the option of Phono Solar or 
(2) refund the percentage of the cost of the Product(s)(as measured by the then  
  prevailing market price for similar Product(s) to the Customer representing the  
  percentage of the power output less than 80% the minimum “Peak Power at STC”1  
  as specified as of the Phono Solar’s product label. 
The  remedies  set  forth  in  this  clause  2  shall  be  the  sole  and  exclusive  remedies 
provided under the “Limited Peak Power Warranty”

Twenty Five (25) years

Limited Peak Power Warranty - Limited Remedy

If, within a period of Twelve (12) years from the date of delivery by Phono Solar to 
the first buyer any Product exhibits a power output less than 90% of the minimum “Peak 
Power at STC”1 as specified as of the Phono Solar´s product label, provided that such 
loss in power is determined by Phono Solar (at its sole and absolute discretion) to be 
due to defects in material or workmanship, Phono Solar will, at its sole option, either
(1) replace such loss in power by either (a) providing additional Product(s) to the  
  Customer to make up for such loss in power or (b) replacing the defective  
  Products(s) at the option of Phono Solar or 
(2) refund the percentage of the cost of the Product(s) (as measured by the then  
  prevailing market price for similar Product(s) to the Customer representing the  
  percentage of the power output less than 90% the minimum “Peak Power at STC”1  
  as specified as of the Phono Solar’s product label. 
The  remedies  set  forth  in  this  clause  2  shall  be  the  sole  and  exclusive  remedies 
provided under the “Limited Peak Power Warranty”

Twelve (12) years

14

15

Stability / Reliability / Creativity

Summary of Contents for F Type module













Reviews: