13
Switching the camera on/off
Switching on
1 Press and hold the »POWER « button for a few
seconds to switch on the camera.
- The LED indicator on the back of the camera
flashes in green.
- The operating mode depends on the setting of
the rotary switch.
Note: If
»
«
icon starts blinking on the
display, the time and the date must be set.
See chapter “Setting the time and date” on
page 22.
Switching off
1
Press and hold the »POWER « button for a few
seconds to switch off the camera.
Note: The camera switches off automatically
if no button has been pressed for more than
1,5 minutes or no cable (USB or TV) is
plugged.
Switching on/off the display
1
To switch on the display press »DSP« button.
2
To switch off the display press and hold down
»DSP« button.
PREPARATION__________________