Photonic Universe – Folding solar charging kit – Instruction manual
|
16
Models: SWD-FWP-40M SWD-FWP-60M SWD-FWP-80M SWD-FWP-100M SWD-FWP-120M SWD-FWP-150M
Appendix: Advanced system monitoring &
programming methods
The controller is pre-programmed with factory default parameters,
such as a sealed battery type and a light on/off load working mode.
If these settings or other parameters need to be changed, or if you
would like to be able to monitor in-depth charging information for
your system, the kit’s controller can be connected to one of the
following products below:
Figure 11: Parameter monitoring and programming
There are four connection options which enable you to view and
adjust charging parameters through the controller’s RS485
communication port:
1)
MT50 remote meter
- Requires RS485 to RJ45 connection cable (product code
BW2MT50)
2) PC connection (monitoring software “Solar Station Monitor”)
- Requires RS485 to USB connection cable
3)
Smartphone or tablet connection (monitoring app
“Solar
Station Monitor”)
- Requires RS485 to USB cable and OTG mobile cable