Chapter 4. System Settings
• Using user white balance
User white balance can be set in order to achieve the most appropriate white balance for the light
source used and the conditions during recording.
The values set here are stored in the camera's internal memory as the user preset, and they can be
loaded by selecting USER.
There are also two methods for setting user white balance, AUTO USER and EDIT USER.
Each of these
methods is explained here.
■
Configuring white balance with AUTO USER
①
Set the desired conditions (frame rate, shutter speed, resolution) for recording.
②
Press the remote controller's MENU key to display the menu list.
③
Select COLOR TEMP from the ADJUSTMENT submenu with the remote controller's ARROW
keys and press the ENTER key.
④
Select AUTO USER1 or AUTO USER2 and press the ENTER key to start the white balance
adjustment mode.
⑤
Verify that a value similar to that shown below is displayed at the bottom left of the screen.
⑥
Turn on the lighting to be used for recording, and in the center of the screen, show an object,
such as white paper, to be the white reference.
⑦
Adjust the lens aperture and the light intensity. Verify that the value at the bottom left of the
screen changes with the intensity of the light entering the camera.
If the brightness on the
screen changes but the display does not, verify that the white reference object is shown in
the middle of the screen.
42
Summary of Contents for Revision 1.03E
