16
To use HSS Mode:
1. Press
Button to cycle through the Sync Mode of the flash.
2. When the
icon is displayed, the flash is set at HSS Mode
3. You can now set the camera to use a shutter speed faster than the sync
speed for the camera
Please note:
Check that the HSS icon(
) is displayed in the viewfinder
- HSS drastically reduces flash power, battery power and range.
- HSS is not available in Stroboscopic Mode
Second Curtain Sync – SCS
The Phottix Juno TTL Second Curtain Sync Function makes the flash fire at the
end of an exposure, not the beginning. This can be useful with slow shutter
speeds for capturing special effect.
To use:
1. Press
Button to cycle through the Sync Mode of the flash.
2. When the
icon is displayed, the flash is set at SCS Mode
Note:
SCS Function is not available in Stroboscopic Mode
M: Manual Mode
In Manual Mode the flash will fire at the power level set on the flash. The Phottix
Juno TTL Flash can be adjusted from 1/1 (full power) to 1/128 – 8 stops of
adjustments in 1/3rd stop increments. Aperture, shutter speed and ISO on the
camera need to be manual adjusted. For best results use camera M-Manual
Mode.
To use:
1. Press “MODE” Button until the flash displays M on the top left corner of the
LCD.
